1 - 28 of 39 Listings
Working Width: 10 ft
Serial Number: UNKNOWN
Condition: Used
Rear Attachment: Yes
Front Blade Mounting Type: Rigid
Rear Attachment Type: Coil Tine
Description: Brillion soil saver 7 shank chisel. No welds, breaks or bends. Used on a 200 acre farm. Very good tires, chisel is field ready. Owner retiring. Us...
Updated: Wednesday, August 26, 2026 02:03 PM
Location: Malta, Illinois
Seller: Almburg Equipment Auctions
Working Width: 17 ft 6 in
Serial Number: UNKNOWN
Condition: Used
Number of Shanks: 7
Operating Condition: Operable
Field Ready: Yes
Description: DMI Tiger II 7 shank Ripper. New blades in 2023, newer tires, Heavy Duty Gates 4 row Coil Tine drag on the back to level rip. 2 wing points are mis...
Updated: Wednesday, August 26, 2026 02:09 PM
Location: Dekalb, Illinois
Seller: Almburg Equipment Auctions
Working Width: 22 ft 6 in
Serial Number: N00512X010253
Condition: Used
Frame Type: 3-Section Folding
Ripper Type: Combination Ripper
Description: John Deere 512 Disc Ripper9 Shank.22'6" Working Width.Disc blades measure roughly 24" front and rear.All new disc bearings front and rear...
Updated: Wednesday, August 26, 2026 02:20 PM
Location: Kansas, Illinois
Seller: Almburg Equipment Auctions
Lot # 4534
CASE IH ECOLO-TIGER 530B
Rippers
Auction Ended:Wed, Sep 02, 2026 12:06 PM (CDT)
Working Width: 13 ft
Serial Number: JFH0911765
Condition: Used
Number of Shanks: 5
Mounting Type: Pull-Type
Rear Attachment: Yes
Description: Case-IH 530B 5 shank, 12.6 ft. ripper. Has rear disc leveler blades that can be lifted up or down along with hydraulic front disc gangs that can al...
Updated: Wednesday, September 02, 2026 12:23 PM
Location: Hampshire, Illinois
Seller: Almburg Equipment Auctions
Lot # 11654
CASE IH ECOLO-TIGER 730B
Rippers
Auction Ended:Wed, Sep 02, 2026 12:09 PM (CDT)
Serial Number: JFH0010892
Condition: Used
Mounting Type: Pull-Type
Rear Attachment: Yes
Single Point Depth Control: Yes
Front Blade Mounting Type: Cushion
Description: Case IH Eco Tiger 730B ripper will need a few parts before heading to the field. Some leveling discs are missing, and one outside front disc needs...
Updated: Wednesday, September 02, 2026 12:24 PM
Location: Malta, Illinois
Seller: Almburg Equipment Auctions
Serial Number: UNKNOWN
Condition: Used
Number of Shanks: 5
Operating Condition: Operable
Field Ready: Yes
Mounting Type: Pull-Type
Description: DMI 530B 5 shank ripper. Good shape used last fall. Shed stored and ready to go to the field. Located Just north of Leland IL for information. Sell...
Updated: Wednesday, September 02, 2026 12:26 PM
Location: Leland, Illinois
Seller: Almburg Equipment Auctions
Working Width: 15 ft
Serial Number: 22H9300156
Condition: Used
Number of Shanks: 6
Operating Condition: Operable
Field Ready: Yes
Description: Landoll 2200 6 Shank chisel plow. Good shape was used two seasons ago. This ripper has good tires, shanks blades are average. Ready for fall tilla...
Updated: Wednesday, September 02, 2026 12:30 PM
Location: Malta, Illinois
Seller: Almburg Equipment Auctions
Lot # 7096
2021 CASE IH ECOLO-TIGER 875
Rippers
Auction Ended:Wed, Sep 09, 2026 11:59 AM (CDT)
Working Width: 22 ft
Serial Number: YMD090391
Condition: Used
Number of Shanks: 11
Shank Spacing: 24 in
Field Ready: Yes
Description: 2021 Case IH 875 ripper with 11 shanks and a 22-foot working width. Disc blades measure about 24 inches wide across the axle arbor, spaced 12 inche...
Updated: Wednesday, September 09, 2026 12:15 PM
Location: Malta, Illinois
Seller: Almburg Equipment Auctions
Serial Number: JFH0048011
Condition: Used
Number of Shanks: 11
Operating Condition: Operable
Field Ready: Yes
Mounting Type: Pull-Type
Description: Case IH 870 chisel plow good shape field ready used last fall. Farmer was 50-50 corn and beans and did around 700 acres a year. Ready for the field...
Updated: Wednesday, September 09, 2026 12:19 PM
Location: Malta, Illinois
Seller: Almburg Equipment Auctions
Working Width: 18 ft
Serial Number: 20054
Condition: Used
Number of Shanks: 7
Operating Condition: Operable
Field Ready: Yes
Description: M&W 1875 chisel plow use last year Farmer just upgraded. Feel ready for fall tillage no Jack for the tongue. Located in Paw Paw Illinois for inform...
Updated: Wednesday, September 09, 2026 12:22 PM
Location: Paw Paw, Illinois
Seller: Almburg Equipment Auctions
Lot # 9474
CASE IH ECOLO-TIGER 530B
Rippers
Auction Ended:Wed, Sep 18, 2024 01:04 PM (CDT)
Serial Number: JFH0020336
Condition: Used
Number of Shanks: 5
Operating Condition: Operable
Field Ready: Yes
Mounting Type: Pull-Type
Description: CaseIH Eco tiger 530B ripper, 2 owner came off of a 700 acre farm, well taken care just recently greased, and field ready, 16.5-16.1 tires, winged ...
Updated: Friday, September 27, 2024 06:52 PM
Location: Malta, Illinois
Seller: Almburg Equipment Auctions
Serial Number: N02100X012036
Condition: Used
Number of Shanks: 5
Shank Spacing: 30 in
Operating Condition: Operable
Mounting Type: 3 Pt.
Description: For sale: John Deere 2100 inline ripper in like-new condition, featuring 5 shanks with 30-inch spacing, dual spring reset shanks, winged points, an...
Updated: Friday, September 27, 2024 06:59 PM
Location: Lincolnshire, Illinois
Seller: Almburg Equipment Auctions
Working Width: 14 ft
Serial Number: 10099
Condition: Used
Number of Shanks: 7
Shank Spacing: 24 in
Mounting Type: Pull-Type
Description: M&W 1700 Ripper, 7 shanks, 24" spacing, front disc gangs are on hyd depth control, we also have two brand new bearings, farm noticed two were needi...
Updated: Wednesday, October 09, 2024 12:19 PM
Location: Sycamore, Illinois
Seller: Almburg Equipment Auctions
Working Width: 12 ft
Serial Number: 4411I20010021
Condition: Used
Number of Shanks: 9
Shank Type: Deep
Field Ready: Yes
Description: Sunflower 4411 one section chisel plow in good shape no welds or cracks. Farmer just upgraded always shed. Stored will not being used wing shanks f...
Updated: Wednesday, November 06, 2024 12:22 PM
Location: Malta, Illinois
Seller: Almburg Equipment Auctions
Working Width: 20 ft
Serial Number: 10014
Condition: Used
Shank Spacing: 30 in
Mounting Type: Pull-Type
Rear Attachment: Yes
Description: 200 and9 M & W 2210 Ripper seven shanks, 30 inch spacing, two rows of discs upfront around 20 to 22 in diameter, Walking tandems on mainframe, Spri...
Updated: Wednesday, November 20, 2024 01:47 PM
Location: Cortland, Illinois
Seller: Almburg Equipment Auctions
Working Width: 14 ft
Serial Number: 000780
Condition: Used
Number of Shanks: 5
Shank Spacing: 30 in
Field Ready: Yes
Description: M&W 1465 Ripper, repainted by the owner, 3 new center shanks, all new points, rear spring tooth harrow. new tires last season as well. Selling a ni...
Updated: Wednesday, December 11, 2024 01:23 PM
Location: Sycamore, Illinois
Seller: Almburg Equipment Auctions
Working Width: 14 ft
Serial Number: 001042
Condition: Used
Number of Shanks: 5
Field Ready: Yes
Rear Attachment: Yes
Description: M&W ripper re painted by the owner, new tires last season, new Remlinger drag last season, points were new last year as well, LED warning lights, A...
Updated: Wednesday, December 11, 2024 01:24 PM
Location: Sycamore, Illinois
Seller: Almburg Equipment Auctions
Lot # 7965
2010 CASE IH ECOLO-TIGER 870
Rippers
Auction Ended:Wed, Dec 18, 2024 02:47 PM (CST)
Working Width: 14 ft
Serial Number: JFH0052572
Condition: Used
Number of Shanks: 7
Shank Spacing: 24 in
Operating Condition: Operable
Description: 2010 Case IH Eco Tiger 870 Ripper. 1 owner approximately 350 acres a year use, single point depth control, winged points, spring reset shanks, with...
Updated: Wednesday, December 18, 2024 03:03 PM
Location: Kingston, Illinois
Seller: Almburg Equipment Auctions
Working Width: 14 ft
Serial Number: 23H1000006
Condition: Used
Number of Shanks: 5
Shank Spacing: 30 in
Operating Condition: Operable
Description: 2017 Landoll 2310 5 shank 30" spacing, front and rear disc blades and rear chopper reel. winged points, spring reset shanks, field ready just finis...
Updated: Wednesday, December 18, 2024 03:13 PM
Location: Kingston, Illinois
Seller: Almburg Equipment Auctions
Working Width: 15 ft
Serial Number: 23H1100099
Condition: Used
Number of Shanks: 6
Shank Spacing: 30 in
Mounting Type: Pull-Type
Description: 2011 Landoll 2310-630 Ripper, same owner since 2012, Hydraulic Disc gang depth control, Rear Gates 4 bar HD Coil tine, 1000 acres on all new blades...
Updated: Wednesday, August 13, 2025 12:13 PM
Location: Compton, Illinois
Seller: Almburg Equipment Auctions
Working Width: 17 ft 6 in
Serial Number: 724766
Condition: Used
Number of Shanks: 7
Shank Spacing: 30 in
Operating Condition: Operable
Description: DMI Eco tiger 730 B Ripper wing fold outside discs, six lead shanks, seven ripper shanks winged with shin-guards comes with a bucket full of extra ...
Updated: Wednesday, August 20, 2025 11:55 AM
Location: Malta, Illinois
Seller: Almburg Equipment Auctions
Working Width: 14 ft
Serial Number: 13747
Condition: Used
Frame Type: 1-Section
Ripper Type: Combination Ripper
Description: M&W Earthmaster 1475 ChiselNice condition chisel.No major welds or cracks on the frame or axle.Disc blades measure roughly 23 inches.24" ...
Updated: Wednesday, August 20, 2025 11:58 AM
Location: Kansas, Illinois
Seller: Almburg Equipment Auctions
Working Width: 17 ft 6 in
Serial Number: 1N00512XEB0740599
Condition: Used
Number of Shanks: 7
Shank Spacing: 30 in
Field Ready: Yes
Description: John Deere 512 ripper, 7 shanks 30" apart, winged points, single point depth control, rear folding wings, discs are in good shape with lots of life...
Updated: Wednesday, September 03, 2025 12:17 PM
Location: Dekalb, Illinois
Seller: Almburg Equipment Auctions
Working Width: 17 ft 6 in
Serial Number: N02700X008104
Condition: Used
Number of Shanks: 7
Shank Spacing: 30 in
Mounting Type: Pull-Type
Description: 2009 John Deere 2700 Mulch Ripper, Individual discs, 7 shanks, shin guards, winged points, single point depth control, outside disc and leveling di...
Updated: Wednesday, September 03, 2025 12:17 PM
Location: Shannon, Illinois
Seller: Almburg Equipment Auctions
Working Width: 17 ft 6 in
Serial Number: 10025
Condition: Used
Number of Shanks: 7
Shank Spacing: 30 in
Operating Condition: Operable
Description: M&W Earth Master 2200 ripper good shape was used last fall has a spot where it was reenforced by the itch some blades on the front have been bent. ...
Updated: Wednesday, September 03, 2025 12:19 PM
Location: Esmond, Illinois
Seller: Almburg Equipment Auctions
Working Width: 12 ft
Serial Number: UNKNOWN
Condition: Used
Number of Shanks: 5
Shank Spacing: 30 in
Field Ready: Yes
Description: Brillion 5-30 Land Commander Ripper, Front and rear discs blades, straight point and shin guards. Works as it should. Located in Newark IL Call And...
Updated: Wednesday, September 10, 2025 01:17 PM
Location: Newark, Illinois
Seller: Almburg Equipment Auctions
Lot # 6786
CASE IH ECOLO-TIGER 530B
Rippers
Auction Ended:Wed, Sep 10, 2025 01:02 PM (CDT)
Working Width: 12 ft 5 in
Serial Number: JFH0029654
Condition: Used
Number of Shanks: 5
Shank Spacing: 30 in
Field Ready: Yes
Description: Case IH 530b ripper good shape no welds or brakes used on 400 acres last fall. Located in Compton IL, for information call Adam Almburg, by biddin...
Updated: Wednesday, September 10, 2025 01:19 PM
Location: Compton, Illinois
Seller: Almburg Equipment Auctions
Working Width: 12 ft
Serial Number: 031588
Condition: Used
Rear Attachment: Yes
Rear Attachment Type: Spike / Drag
Frame Type: 1-Section
Description: M&W 1165 Ripper, works as it should, Used last fall, one brand new tire, rear sweep levelers and spike drag, winged points, 5 shank. Located at our...
Updated: Wednesday, September 10, 2025 01:27 PM
Location: Malta, Illinois
Seller: Almburg Equipment Auctions